The innovative Abyzz A400 pump with its titanium impeller consists of powerful and programmable, menu-controlled, electronic driver and a sinusoidal, three-phase synchronous motor (pump).
The motor operates at an efficiency factor of over 90% which, along with the fact that you can adjust the speed to meet your performance requirements, makes it an energy-saving solution to traditional power hungry higher voltage pumps.
The integrated flushing bearing provides optimum protection against calcification (Calcium Carbonate deposits - CaCO3). In conjunction with the silicon carbide bearings and special hard metal shaft, this feature provides for low-maintenance operations.
The materials used to manufacture all of these components have been carefully selected so as to be harmoniously integrated into the overall design to look great, ensure a long operational lifetime, and meet the most demanding requirements and highest quality standards.
This product was developed and is manufactured in Germany by Venotec
BOOSTMODE® max flow rate: 6,075 gph / 23,000 lph
Normal mode max flow rate: 4,800 gph / 18,600 lph
Discharge flow speed: max 7,5 m/s , nominal 6.4 m/s
Delivery height: max. 42.25 ft / 13 m
Rated input: 4W-400W
Input voltage: 240V~
Operating voltage: 200V
Ambient temperature range for operation: 35.5°F - 104°F / +2°C - 40°C
Maximum operating pressure: 17.40 psi / 1,2 bar
Maximum immersion depth: 6.5 ft / 2m
Pump cable length: 32.5ft / 10m
Inlet/outlet connections: 50mm/40mm (suitable for PVC/ABS adhesive fittings)
What's In The Box?
Abyzz A400 pump and 110V 60hz driver
Power cable: 5ft / 1.5M
Driver/Controller connecting cable: 6.5 ft / 2 meters